Liquefied Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container

Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport Lng ContainerCodes and regulationsRID/ADR, IMDG, ASME VIII DIV 1-2017Ed;T75 UN PORTABLE TANK TIR;UIC;CSC;TC;FRA;CFR49;ISO 1496/3;ISO Standard 1161Guidelines for tank containerT75 UN Portable TankISO Size and type code42K7Maximum Allowed Loading Weight17510kgsTare Weight11700kgsAllo

Featured Products

Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport Lng ContainerLiquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container
Codes and regulationsRID/ADR, IMDG, ASME VIII DIV 1-2017Ed;
T75 UN PORTABLE TANK TIR;UIC;CSC;TC;FRA;CFR49;ISO 1496/3;ISO Standard 1161
Guidelines for tank containerT75 UN Portable Tank
ISO Size and type code42K7
Maximum Allowed Loading Weight17510kgs
Tare Weight11700kgs
Allowed stacking weight192000kgs
Manufacturing license levelInside tankC3
 outside tank 
Max. Working Pressure(Mpa.)Inside tank(MPa)0.75
 outside tank(MPa)-0.1(Vacuum)
Min. Working TempretruesInside tank-196°C
 outside tank-40°C
Design Pressure(Mpa.)Inside tank0.8
 outside tank-0.103
Design TempretruesInside tank-196 °C
 outside tank50 °C
The Main materialCoverinside tankSA-240M  304
  outside tankQ345R
 Shellinside tankSA-240M  304
  outside tankQ345R
 Frame workHollow SectionQ345-D--GB/T1591
  PlatesQ345-D--GB/T1591
  Rolled sectionQ345-D--GB/T1591
Overall Size(Frame)/L*W*H/mm12192*2438*2591
MediaInside tankLNG
Media CharacteristicsInside tankexplosive
PaintFrame30µm +40µm +50µm
 Shell30µm +40µm +50µm
Total Volume(L)45700
Type Of InsulationHigh Vacuum Multi-layer Insulation
MaterialAluminium Foil
Provision for BafflesFive sets of surge baffles shall be installed.
Corrosion allowanceInside tank0mm
 outside tank0mm
Nominal thicknessShellInside tank6mm
  outside tank4.0mm
 HeadInside tank8mm
  outside tank6.0mm
Air pressure test pressureInside tank(MPa)1.17
FittingsAll fittings, including valves and pipe sections shall be cleaned and then fitted to the tank.
Welding joint coefficientInside tank1
 outside tank0.85
Leakage Test and Nitrogen PurgeAfter cleaning, all valves, blind flanges, caps and connected piping are installed and a leak test is performed at16.2 bar using clean and dry air.  The vessel will be delivered in a Nitrogen purged condition.  Nitrogen will be used (O2 < 0.5% residual oxygen, 0.5 bar pressure).
Main hazard category2.1
Design service life20 years
Mode of transportationRoad,Sea,Railway
Safety valveQuantityTwo
 Set Pressure+8bar
Liquid Level gaugeGrade2.5
 QuantityOne
 Measuring range(Kpa)0~2.0M  H2O
Loading and unloading deviceGas phase jointTypeFlange connection
  Nominal DiameterDN50
 liquid phase jointTypeFlange connection
  Nominal DiameterDN50
Pressure gaugeQuantityOne
 Measuring range(Mpa)0~1.6
 Precision1.6 Class
1. Inner layer - made of 6 or 8 mm thick Q235-B steel plate, compared with ordinary 5 mm thick single-layer tank, the strength is greatly improved;

2. Outer layer - tempered glass fiber thickness of 4.0mm or more, good compressive and seismic resistance. It has strong corrosion resistance and corrosion resistance;

3.Unique technology is adopted between the inner and outer layers to make it reach a gap of 0.1-1mm, so as to eliminate hidden dangers from the root;

4. Leak detector 24 hours to monitor, to prevent leakage caused by security risks;

5. Widely used for storage and transportation in dairy, beverage, wine technology, with function of anti-seismic, anti-explosion, leakage-proof and cooling.

Detailed photos for the Tank container:
Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container


Factory Workshop:
Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container

3.More Styles for the ISO tanker container:

Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container



4.Design proposal for the 20feet ISO tank container:
---Net capacity: not less than 20cubic; Shell of tank container Materials using Wisco Q235 High quality carbon steel 6mm baffle;
---Two feed inlets,bigger manhole covers, 2 NOS. pressure vent valves( breather valve) , at the end of the bottom , DN80 dump valve(discharge valve). Screw of Openings and valves adopt stainless steel screws, single coaming board on the top of tank Molybdenum red reflective tape;
---Framework is made of High quality steel, each one ladder at back and forth. With two acid resistant tube, two 4kg fire extinguishers.


5.Optional parts for the tanker container:
Volume: 20 cube meters to 52 cube meters
Material: Carbon steel/aluminum/stainless steel material
Medidum:
HYDROFLUDRIC ACID HCI 32%,CAUSTIC SODA NaOH 32%,NaCl. NaClO etc. Chemical Liquid.

6.BRIEF INTRODUCTION TO OUR FACTORY:
Henan Jushixin Transportation Equipment Co.Ltd is the professional manufacturer of ISO tank container,such as standard liquid tanks, electrical heating tanks, reefer tanks, food grade tanks, baffle tanks, swap tanks, gas tanks, H2O2 tanks, AHF tanks, bitumen tanks, different types of lining tanks, etc, and 10ft tanks, offshore tanks, IBC/SBC ,etc, with high standard machinery and automatic equipment, powerful R&D team and elite sales team, we have built a long business relationship with many world famous enterprises.pls contact us if any interset.
Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container


Liquid Gas LNG/CO2/N2/O2/Ammonia Tank Transport LNG Container


7.FlEXIBLE SERVICE WE PROMISED FOR EACH ITEM FROM OUR FACTORY:
>>>Offering the one-stop full lifecycle services;
>>>Our vehicle users will receive 24-hour uninterruptible "Entire Journey" service;

>>>CCC&ISO Agreement, 1 Year Guarantee Term, Main-beam Lifetime Promise;
>>> Small Order Can Be Accepted;
>>>Any Color & Logo Available;
>>>The Product Dimension + Specifications Can Be Designed As Your Needs.


8.Buying Guides
**You please send us your enquiry;
**We shall reply you with the quotation within 12 hours;
**We negotiate on the configuration that you need;
**Confirmation of the tech data → sign contract (P/I) → 30% deposit (or L/C issuing)→ production;
**Manufacturing process updated news → completing production;
**Balance payment → ex works → shipment → custom clearance → A/S service for 1 year.

 
Contact information


 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours